Meizu Pro 6 Plus Tear Down Review: Powered by 5.7 inch Super AMOLED screen / loads Samsung xynos8890 processor

Meizu Pro 6 Plus Tear Down Review: Powered by 5.7 inch Super AMOLED screen / loads Samsung xynos8890 processor

As the annual real flagship of Meizu, Meizu Pro 6 Plus utilized a 5.7 inch Super AMOLED screen display with 2560×1440 pixels of resolution, that is as the saying 2K screen. On camera aspect, which takes the same as Meizu Pro 6S of 12MP IMX386 sensor, and the single pixel area reaches to 1.25um, matching components including 6P lens and 10 LED light, also plunks for Four-axis image stabilization.It is worthy of mentioning that it loads Samsung xynos8890 processor, and there is no doubt that the performance is really excellent. Next, let’s appreciate how the presentation on workmanship via disassemble.

Before dismantling, taking a visit on the appearance.

Meizu Pro 6 Plus takes a 5.7 inch WQHD Samsung Super AMOLED screen, in which the pixels density runs up to 518ppi, NTSC reaches to 103%, as well contrast higher to 10000:1.

Meizu Pro 6 Plus designs in a clean cut, that the back cover adds grinding and arc treatment.

Then have a look at the bezel design.

The whole body is very slim, in spite of it has 5.7 inch screen , which is smaller than iPhone 7 Plus, what’s more, it also fills AOD extinguishing screen display functionality, to show some information on standby status.

Finally, let’s review the specs of this phone .
Meizu Pro 6 Plus runs 4GB memory and 64GB /128GB internal storage, the front facing camera comes 5MP, built- in a 3400mAh battery capacity, and pre- install Flyme operation system.

Now, let’s remove the phone
Step 1

Firstly, as we know that before undo the phone, the first thing we need to do is power off, but there is no problem to pull the card tray out.

Secondly, power off.

Next, using sucker to separate the back.

Insert the crowbar to prise off the back cover.

Then take the back cover down.

The internal structure also design in three-stage.

The boardless of back cover with chickening treatment to largely avoid the motherboard damaging when phone dropping.

Taking contact design setting the power and volume cable on the back.

Step 2
Undo the motherboard, battery, and PCB board at the bottom.

Disconnected the power cable, as if the power cable is not cut, which is likely to appear “UMC“ situation in the period of dismantling, lead to capacitance or resistance is “breakdown” resulting in the hardware failure.

After cutting power cable, all of the screws can be moved.

Removing the screws, we can take out the motherboard.

First, dismount two cameras on motherboard.

Meizu Pro 6 Plus’s main camera sensor is equal to Meizu Pro 6S, which the type is Sony IMX386 with F/2.0 aperture, provided valid pixel of 12MP, supporting PDAF, four-axis optical stabilization and laser assisted focusing.

As the front-facing camera affords 5MP plunking for ArcSoft beauty algorithm.

There is a big difference on size for this two cameras, because of different internal components.

Furthermore, 10 LED can create natural soft fill-in effect, working with in laser assisted focusing that even long distance of 200cm can complete focus for a second

Second, let’s look at the motherboard to find out Exynos8890.

It is under the thermal silicone.

Exynos 8890 is flagship processor under Samsung,

The running points as blow.

After disassembling the motherboard, to see PCB board at the bottom.

The first thing is to undo the screws.

Then using the crowbar to cut the connected cable, and taking the tweezer to dismantle.

Remove the loudspeaker.

Next, undo two fix screws than can remove PCB board.

The PCB board integrated Type-C port, 3.5mm earphone port, microphone, antenna and so forth.

Using tweezer remove vibration unit.

Then undo Home Key, that is Fingerprint scanner.

Meizu Pro 6 Plus added Live Finger Detection base on 360°accurate identification, to realize judge true and false fingerprint, also mTouch supports Heart Rate Detection.

Finally, we need to do is to remove the battery.

Meizu Pro 6 Plus loads 3400mAh battery capacity, supports for 34W Fast Charge, costs 30 minutes can fill in 60%.

All the above is disassemble processing.

Previous Repair Guide: How to take apart Meizu X smartphone?
Next 2017 Samsung Newest series phone: GALAXY A3,GALAXY A5 and GALAXY A7, with waterproof and dust-proof (IP68 )

About author

You might also like

Mobile News 0 Comments

Doogee Turbo2 DG900 Review: 5.0 inch 1080P Screen Andriod 4.4 Octa-core Premium-Looking Smartphone with 16.0MP Camera/Rear Touch Panel

Doogee is an emerging mobile phone brand, which is mainly concentrate on the oversea maket, and each product all owns its feature, such as Doogee DG800、Doogee DG580 and so on

Mobile Reviews 0 Comments

The Youth version of Honor 8 with high face score runs EMUI 5.0 system

In Feb 21st, the Youth version of Honor 8 appeared, and how Honor shows the workmanship on this phone to meet with young group’s consuming habits, please look at below.

Mobile Reviews 0 Comments

Huawei Mate S and Huawei G7 Plus hands-on experience and share: Metal+ Fingerprint mid- and high-end phone

On September 8th , 2015, Huawei officially released its brand new metal flagship Mate S and mid-range device G7 Plus in HangZhou, although both of the phones are metal body